
MW4 DMZ Fulton Drop Marker: What It Does and Recipe
The Fulton Drop Marker is an Ultra Field Upgrade that brings the extraction to you. Set it up where you stand and a plane pulls you out, no exfil site needed. The 3D Printer makes one from one Prototype RF Module, three Comms Modules and five Control Units once you have found the recipe. The Vault Edition kit includes two.
Last updated Game version: Season 1 (November 5, 2026)
Quick answer
- Item card
- “Marks a location and calls a fulton extraction.”
- Type
- Ultra Field Upgrade
- Print it from
- Prototype RF Module ×1, Comms Module ×3, Control Unit ×5
- Recipe
- Loot, worth $5,000
- Free ones
- 2 in the Vault Edition Deployment Kit
- Also in
- Loot containers, rarely
- Not in
- X01
How the Fulton Drop Marker works
- Use the marker from your backpack where you want to leave. It sets down a Fulton device on the ground there.
- Clip the line on: the device sends a balloon up on a cable.
- A transport plane flies in low, catches the cable and pulls you up and away. The screen then reads Extraction Successful, and what you carried counts as extracted.
Setting one up fires a green flare that squads nearby can see, so wait in cover until the plane comes. Pick open ground. Inside a building or a tight spot there is no room for it.

Activision lists a Fulton balloon next to the flare as the ways out that skip an exfil site. The usual way out takes longer: you find an exfil site, marked with green smoke, call in the helicopter and hold the site until it lands.
What the 3D Printer needs for one
A marker can also turn up in containers, but at Ultra rarity that is rare. Printing is the way to keep one ready.
One marker takes one Prototype RF Module, three Comms Modules and five Control Units. The recipe card has to be found first: the recipe card, named Fulton Exfil Marker Recipe in the game, has turned up in a red tool box at Pyeonghwa Village, though not every match. Get out with it and the marker joins your printer for good.
| Ingredient | For one | Rarity and value | Where to look |
|---|---|---|---|
| Prototype RF Module | 1 | Legendary | Found on deathstalkers. |
| Comms Module | 3 | Epic, $1,500 | Found primarily in the Netshin Tech Complex server rooms, Cheonwang Peak Array server rooms, and Deadtown hillside facade buildings. |
| Control Unit | 5 | Uncommon, $200 | Found in computers and tech bags. |
The Prototype RF Module is the hard part: it comes off Deathstalkers, so plan the print around one of those fights. Add the marker to a shopping list with everything else you want to print in our 3D Printer planner.
The Vault Edition's free markers
Owners of the Vault Edition start with a Deployment Kit, and two Fulton Drop Markers are in it. Save them for a run with loot worth keeping. What else each edition adds is in our MW4 editions comparison.
Where it does not work: X01
Save the marker for Hajin. In X01 it does not work, so what you want to keep leaves through one of the facility's own exits. Those exits, including the Staff Emergency Exfil Keycard shafts, are in our X01 exfil keycard guide.
Questions
What does the Fulton Drop Marker do in MW4 DMZ?
It calls an extraction to where you stand, so you can leave without going to an exfil site. The item card reads: "Marks a location and calls a fulton extraction."
How do you make a Fulton Drop Marker?
At the 3D Printer, once you have its recipe. One costs one Prototype RF Module, three Comms Modules and five Control Units. The recipe is loot: find it in Hajin and get out with it, and the marker can be printed from then on.
Where do you find the Fulton Drop Marker recipe?
The recipe card, named Fulton Exfil Marker Recipe in the game, has turned up in a red tool box at Pyeonghwa Village, though not every match. The card is worth $5,000.
Does the Vault Edition give Fulton Drop Markers?
Yes, two. They come in the Vault Edition Deployment Kit, together with 2 Weapon Insurance Contracts, 2 Operator Rescue Beacons, 2 Medium Backpacks and 2 2-Plate Carriers.
Does the Fulton Drop Marker work in X01?
No. Inside the facility you leave by a lift, the Power Generators gate or an emergency exfil shaft, so keep the marker for Hajin.
Official sources
Continue reading
Next stepHeading into X01? The marker fails there: see the keycard for an emergency exfil shaft.DMZ X01 Staff Emergency Exfil Keycard: How to UseHow to get the Staff Emergency Exfil Keycard, where the two Emergency Exfil Shafts in X01 are, the unlock step by step and how it compares with the lift.Go there Related guides
PlayingCan You Play MW4 DMZ Solo? How Solo WorksWhether you can play MW4 DMZ solo, how to turn Squad Fill off, what changes alone, the Traits that help and what happens when you go down.
BuyingIs MW4 DMZ Free? What You Need to Play ItWhether MW4 DMZ is free to play, what you have to buy to play it, which editions get DMZ Early Access and when MW4 joins Game Pass.
ItemsDMZ Secure Restock Kit and Other Restock KitsThe Secure Restock Kit at Battle Pass tier 78 and what it holds, the Event Restock Kit, the level 8 and 24 Restock Kits and the two from Orders.